Isotherm Smart Energy Control is to help Conserving Energy in Refrigeration system. Refrigeration systems on boats consume quite a bit of electrical power and if you have plenty of it that’s fine, but you often have times where you would like to conserve power. Let’s say you are on the hook and go ashore, you would like the fridge to keep you food cold, but you want to come back on board to the batteries that are not flat.
The isotherm smart energy controller (ISEC) is designed to economize battery usage. Depending on electricity availability the compressor automatically adjusts its RPMs in order to boost functions when necessary or energy saving when power is not available. Also, this technology is able to use the stored energy in your food and will use this coolness storage in order to overcome periods with limited power access.
The ISEC is designed for easy mounting to the Danfoss DC module on Cruise Elegance Refrigerators and with most appliances and systems that use Danfoss compressors with DC electronics modules
Isotherm Smart Energy Control Cooling
Isotherm Smart Energy Control ASU Technology Frost Free Technology Cold Facts With Isotherm Smart Energy Control, Indel Webasto Marine offers the very unique opportunity to dramatically reduce on board power consumption for refrigeration appliances.
This kit can be easily retrofitted to upgrade the energy saving capabilities of your existing Isotherm refrigeration product. The new CRUISE Elegance line provides a pre-formed location in the cabinet.
How does it work ?
The sophisticated, processor-based Isotherm Smart Energy Control technology achieves significant power consumption savings by continuously scanning a set of key environmental factors to determine, through advanced proprietary algorithms, what is the most relevant compressor speed to maximize the performance/battery drain ratio (COP).
The device not only makes your fridge intelligent but also allows the storage of a significant amount of cold energy into the loaded food and drinks. Isotherm Smart Energy Control reduces the cabinet temperature more than a traditional fridge without freezing the food. This is continuously monitored by an air sensor in the cabinet. The cooling energy is stored when a power surplus is available (engine on or connection to grid) and reused first, before the fridge is running on battery.
The result: Up to 35 % savings due to a more efficient use of the compressor and up to 50 % savings with combined effects of stored cooling energy in food and drinks.
Multiple benefits from a simple kit:
No need for eutectic plates / special storage devices Easy to retrofit Quick cooling in boost mode Soft start option to avoid starting surges
Isotherm Smart Energy Controller
The smart controller can be retrofitted to any Isotherm refrigeration product and just about any refrigeration system that utilizes the Danfoss compressor. Cabinet refrigerators with Danfoss DC electronic modules or module units using the Danfoss
So what power savings are in order?; the claim is 30- to 50-percent reduction in on-board DC power consumption for the refrigeration system.
$147.99; The kit consists of the SEC module, temperature probe, thermostat knob, and mounting bracket.