Universal inspection port tanks by Vetus’s has a clever “clamp and seal” design that allows them to be quickly installed on any metal, fiberglass or thick-walled plastic tank. Just cut the correct hole diameter in the top of the tank. The underside of the port can be dropped through the hole and offered up under the tanks top. The port can now be bolted to the underside.
Universal inspection port tanks
Innovative inspection port (ILT) with robust design.
This large inspection port for (bio)diesel, fuel, fresh water and waste water tanks has a flange-in-ring design which makes opening of the port easy, even after being closed for a long time. With a Ø120 mm diameter the port meets the ISO21487 regulations for fuel tanks.
The counter flange and rubber seal are inserted in a Ø159mm hole in the tank, tightened by 4 bolts. When compressed, the rubber seal expands sideways to lock the inspection port into the tank. Cleaning and inspecting the tank has never been this easy.
• Dimension Ø120mm / 159mm hole
• Suitable for G.R.P., stainless steel and plastic tanks with different wall thicknesses